MD360 skirting board
The MD360 skirting board is a classic in form skirting board, finished with a subtle decorative element. The profile was created from high-quality, resistant to negative external factors PolyForce material along with the use of ScratchShield technology. .
For technological reasons, all dimensions may vary within a tolerance of +/- 0.5%
The MD360 skirting board is dedicated to covering the expansion gap in the floor. It will be perfect for masking wires and cables, thanks to the special space at the back of the skirting board. High-quality PolyForce plastic makes the MD360 waterproof – it can be used in wet rooms, and is UV-resistant – intense sunlight does not cause cracking or discoloration of the material. ScratchShield technology makes the surface harder than traditional skirting boards, and thus much more resistant to scratches and deformation. The skirting board comes in a primer-coated version, ready to be coated with water-based paint, a premium version in a luxurious SupremeSatin satin lacquer, and a flex version that allows installation on uneven surfaces. .
Maximum hardening of the strip
The skirting board has innovative ScratchShield technology, which consists in maximizing the hardening of the skirting board with polymer compounds by 40% compared to skirting boards that do not have this technology. Increased impact strength and impact resistance, translate into a noticeable improvement in the durability of the molding when trying to scratch it with a sharp tool. Skirting boards with ScratchShield technology are the toughest skirting boards on the market.
The strip is fully waterproof. This means that it can be successfully used in rooms with high humidity, such as bathrooms or kitchens. In a situation of flooding, direct contact will not affect the appearance of the strip.
The molding, thanks to special refinements and coatings, is resistant to UV radiation. Installation of the molding in a sunny place will not cause its yellowing or discoloration.
The molding is factory-coated with a special primer with smoothing, protecting and facilitating the distribution of subsequent layers of paint. For a perfect visual effect, we recommend painting the molding with any water-based paint after installation.
Resistant to swelling
Mardom Decor moldings, unlike those made of MDF and other plastics, do not deform, delaminate or swell under the influence of moisture. They are dimensionally stable and do not shrink or expand under the influence of changes in atmospheric conditions in the room.