MD325 wall strip
The MD325 wall trim is an oblong profile with an elegant wave-like decoration at the bottom of the trim. It is made of resistant PolyForce material, resistant to water and UV rays. The surface of the molding is extremely hardened, thanks to ScratchShield® technology..
We are one of the main manufacturers of stucco in Europe. Our production takes place in Poland, we take care of the highest quality products.
Want to check the quality of our products - order free samples so you can be sure if the product meets your expectations.
Delivery in 24h
and free return
We process all orders within 24 hours. You can return your order within 14 days of receiving the shipment without giving any reason.
Our customer service guarantees the highest level of advice. If you have doubts about your purchase, please write to us or call us.
Ze względów technologicznych wszystkie wymiary mogą wahać się w tolerancji +/- 0,5%
The MD325 wall strip is an elegant wall strip that has many uses. The skirting board can be used as a wall decoration, a picture or mirror frame, and also as a wall trim. It is made of waterproof PolyForce material, which repels water particles. The molding can be installed in the kitchen or bathroom. MD325 is also UV-resistant, so it won’t yellow and can be installed even in heavily sunlit rooms. The wall molding has been enhanced with ScratchShield® technology, which hardens the material to the maximum, further protecting the surface if you try to scratch it with a sharp tool. A special primer smooths the molding and prepares it for painting.
Maximum hardening of the strip
The skirting board has innovative ScratchShield technology, which consists in maximizing the hardening of the skirting board with polymer compounds by 40% compared to skirting boards that do not have this technology. Increased impact strength and impact resistance, translate into a noticeable improvement in the durability of the molding when trying to scratch it with a sharp tool. Skirting boards with ScratchShield technology are the toughest skirting boards on the market.
The strip is fully waterproof. This means that it can be successfully used in rooms with high humidity, such as bathrooms or kitchens. In a situation of flooding, direct contact will not affect the appearance of the strip.
The molding, thanks to special refinements and coatings, is resistant to UV radiation. Installation of the molding in a sunny place will not cause its yellowing or discoloration.
The molding is factory-coated with a special primer with smoothing, protecting and facilitating the distribution of subsequent layers of paint. For a perfect visual effect, we recommend painting the molding with any water-based paint after installation.
Resistant to swelling
Mardom Decor moldings, unlike those made of MDF and other plastics, do not deform, delaminate or swell under the influence of moisture. They are dimensionally stable and do not shrink or expand under the influence of changes in atmospheric conditions in the room.