MD011 skirting board
MD011 skirting board is a profile with a simple design, which will work well in almost any interior - especially one in which the skirting board is to be only a delicate accent, and not a dominant decorative element. The skirting board was made of high-quality PolyForce, which guarantees protection against water or yellowing under the influence of sunlight.
For technological reasons, all dimensions may vary within a tolerance of +/- 0.5%
MD011 skirting board is a simple, universal design that will easily fit into any interior design. The skirting board was made of PolyForce, which is characterized by extreme durability. It has waterproof properties and effectively reflects the sun’s rays, preventing unsightly yellowing of the molding. MD011 has ScratchShield® technology, which hardens the material to the maximum, protecting the surface from the impact of a vacuum cleaner or children’s toys. Thanks to its high technical parameters, the skirting board maintains its original form throughout its life. MD011 skirting board is covered with a special primer, which smooths the surface and facilitates the subsequent painting of the skirting board. The small size of the skirting board will prove useful in lower rooms or in such rooms where the skirting board is only to finish the connection between the floor and the wall in a subtle way. The molding measuring 4 cm will not optically shorten the surface and will not dominate the interior with its size.
Maximum hardening of the strip
The skirting board has innovative ScratchShield technology, which consists in maximizing the hardening of the skirting board with polymer compounds by 40% compared to skirting boards that do not have this technology. Increased impact strength and impact resistance, translate into a noticeable improvement in the durability of the molding when trying to scratch it with a sharp tool. Skirting boards with ScratchShield technology are the toughest skirting boards on the market.
The strip is fully waterproof. This means that it can be successfully used in rooms with high humidity, such as bathrooms or kitchens. In a situation of flooding, direct contact will not affect the appearance of the strip.
The molding, thanks to special refinements and coatings, is resistant to UV radiation. Installation of the molding in a sunny place will not cause its yellowing or discoloration.
The molding is factory-coated with a special primer with smoothing, protecting and facilitating the distribution of subsequent layers of paint. For a perfect visual effect, we recommend painting the molding with any water-based paint after installation.
Resistant to swelling
Mardom Decor moldings, unlike those made of MDF and other plastics, do not deform, delaminate or swell under the influence of moisture. They are dimensionally stable and do not shrink or expand under the influence of changes in atmospheric conditions in the room.