Ceiling strip MD030
The MD030 ceiling strip is a minimalist profile, made of highly resistant PolyForce plastic. The simple shape guarantees a perfect match to any interior style.
We are one of the main manufacturers of stucco in Europe. Our production takes place in Poland, we take care of the highest quality products.
Want to check the quality of our products - order free samples so you can be sure if the product meets your expectations.
Delivery in 24h
and free return
We process all orders within 24 hours. You can return your order within 14 days of receiving the shipment without giving any reason.
Our customer service guarantees the highest level of advice. If you have doubts about your purchase, please write to us or call us.
Ze względów technologicznych wszystkie wymiary mogą wahać się w tolerancji +/- 0,5%
The MD030 ceiling molding is a simple profile with a subtly rounded shape. Thanks to its minimalist design, the stucco will fit into all arrangements, and the high-quality, resistant PolyForce material will allow installation in any type of room. The molding is UV and water resistant, making it suitable for decorating a bathroom, kitchen, living room or bedroom. In addition, it has innovative ScratchShield® technology, which, by increasing the density of the material, has maximally hardened the surface of the stucco. The molding is resistant to mechanical damage, making it suitable for homes with small children and pets, and even in commercial use.
Maximum hardening of the strip
The skirting board has innovative ScratchShield technology, which consists in maximizing the hardening of the skirting board with polymer compounds by 40% compared to skirting boards that do not have this technology. Increased impact strength and impact resistance, translate into a noticeable improvement in the durability of the molding when trying to scratch it with a sharp tool. Skirting boards with ScratchShield technology are the toughest skirting boards on the market.
The strip is fully waterproof. This means that it can be successfully used in rooms with high humidity, such as bathrooms or kitchens. In a situation of flooding, direct contact will not affect the appearance of the strip.
The molding, thanks to special refinements and coatings, is resistant to UV radiation. Installation of the molding in a sunny place will not cause its yellowing or discoloration.
The molding is factory-coated with a special primer with smoothing, protecting and facilitating the distribution of subsequent layers of paint. For a perfect visual effect, we recommend painting the molding with any water-based paint after installation.
Resistant to swelling
Mardom Decor moldings, unlike those made of MDF and other plastics, do not deform, delaminate or swell under the influence of moisture. They are dimensionally stable and do not shrink or expand under the influence of changes in atmospheric conditions in the room.
The skirting board has a unique LightGuard® technology, which completely prevents the LEDs from pointing through the surface of the skirting board. The PolyForce® material from which the trim is made is incredibly dense and enriched with specialized enhancers, so the light diffuses beautifully around the profile. The back side of the molding with LightGuard® technology has specially shaped spaces for the insertion of LED tape. This allows the light to fall at an angle that gives the best illumination effect. Gluing an LED strip to a strip that does not have LightGuard® technology results in unsightly clearances.