MD338 wall strip
The MD338 wall strip is a decorative stucco with a distinctive milling. Made of PolyForce with ScratchShield® technology, it guarantees resistance to scratches and impacts, water and UV radiation. A special primer smoothes the surface and prepares it for painting.
For technological reasons, all dimensions may vary within a tolerance of +/- 0.5%
The MD338 wall strip is a decorative profile with a height of 8 cm. Expressive milling gives the stucco elegance and a classic character. It will work well both as a single accent on the wall, e.g. as a cut-off strip at the height of 1/3 of the wall, but also in a wall composition in the company of, for example, screens made of more subtle strips. The profile is made of proprietary PolyForce material, resistant to sun and water. It does not swell, deform or turn yellow, even after long periods of use. MD338 also has the innovative ScratchShield® technology, which hardens the surface of the strip, making it 40% more resistant than models without this technology. Stucco is perfect for home and commercial use. It was covered with a white primer, which allows for trouble-free and repeated repainting of the surface in any color. The MD338 model also has a Flex version equivalent.
Maximum hardening of the strip
The skirting board has innovative ScratchShield technology, which consists in maximizing the hardening of the skirting board with polymer compounds by 40% compared to skirting boards that do not have this technology. Increased impact strength and impact resistance, translate into a noticeable improvement in the durability of the molding when trying to scratch it with a sharp tool. Skirting boards with ScratchShield technology are the toughest skirting boards on the market.
The strip is fully waterproof. This means that it can be successfully used in rooms with high humidity, such as bathrooms or kitchens. In a situation of flooding, direct contact will not affect the appearance of the strip.
The molding, thanks to special refinements and coatings, is resistant to UV radiation. Installation of the molding in a sunny place will not cause its yellowing or discoloration.
The molding is factory-coated with a special primer with smoothing, protecting and facilitating the distribution of subsequent layers of paint. For a perfect visual effect, we recommend painting the molding with any water-based paint after installation.
Resistant to swelling
Mardom Decor moldings, unlike those made of MDF and other plastics, do not deform, delaminate or swell under the influence of moisture. They are dimensionally stable and do not shrink or expand under the influence of changes in atmospheric conditions in the room.