Mounting a curtain rod bezel – practical tips for beginners
Ceiling rails have a utilitarian function, but their appearance often does not fit into a sleek, modern space. That’s why the curtain rail bezel has become an integral part of stylish interior design. It is a subtle detail that effectively hides the curtain fastening system, while giving the ceiling an aesthetic and consistent character.
What will you learn from this article?
What is a curtain rod bezel?
A curtain rod bezel is an element of ceiling stucco that covers rails or curtain rods. It allows you to achieve consistent and elegant interior finishes, and in addition, it introduces a modern character by eliminating the visibility of curtain mounting systems and curtains.
The grilles available in our offer are created from PolyForce plastic. Jets is a material resistant to moisture and mechanical damage. It does not deform under the influence of high temperature or UV radiation. It can be used in rooms with higher humidity.
Some models use LightGuard technology. Thanks to it, profile does not let the LED light through. Importantly, the installation of LED tape does not require an additional reflective shield.
Which grille models should pique your interest?
- QL026 – minimalist profile with a height of 10 cm. It will work well in modern arrangements. It has a simple form without decorations.
- MD137 – a classic model, often chosen by our customers. Delicate milling gives elegance. Ideal for interiors in classic and glamorous style.
- QL035 – a model with a height of 12 cm and a width of 4 cm. The refined design fits modern interiors. Durable PolyForce material, on the other hand, provides resistance to damage.
Why choose a ceiling curtain rod bezel?
A ceiling curtain rod cover is not only a way to hide the curtain rails, but also a decorative element that affects the final appearance of the interior. Properly selected profile masking will bring coherence to your home. Here are the benefits of choosing it:
Aesthetic finish
In refined arrangements, details are crucial. Can you imagine a beautiful living room where the ceiling rails are visible at first glance? It would spoil the whole effect, which is why simple yet smooth bezels, such as QLO26, are so important. This model blends perfectly with both the suspended ceiling and the classic finish of the room.
The bezel allows you to hide minor architectural imperfections – wall joints or unsightly transitions between ceilings. This will make the interior refined and harmonious.
Integrated LED lighting
Light is very important in modern designs. It is it that can highlight decorative elements or colors. Unfortunately, ill-fitting lighting can spoil the whole effect. In your living room, bedroom or even office there should be proven solutions, to be more precise – integrated LED lighting that can be hidden in a grille.
Mardom Decor curtain rod bezels are equipped with LightGuard technology. This is an innovative solution that eliminates the effect of spot LEDs piercing through the material. Thanks to the specially developed structure of the material and the use of enhancers, the light is evenly dispersed over the entire surface profiles, without the need for additional aluminum strips.
Mouldings and grilles with LightGuard technology provide an aesthetically pleasing and uniform lighting effect. In addition, thanks to their resistance to moisture and UV radiation, the products retain their properties and color for many years.
Durability and resistance to adverse conditions
The grilles available in our offer are made of PolyForce material, which is characterized by high resistance to moisture, UV radiation and mechanical damage. Thanks to this, they can be used not only in living rooms or bedrooms, but also in kitchens and bathrooms, where conditions can be more demanding.
The plastic does not deform over time – this means that profile retains its original shape and color for years. Unlike gypsum or wooden stucco pieces, PolyForce fascias are lightweight, resistant crack-resistant and easy to install.
How does the installation of the curtain rod bezel look like?
The installation of a ceiling curtain rod may give you difficulties, but it is completely different with a grille. She does not require special skills, which is why she is so liked by our customers. How exactly does the whole process work?
Preparation of tools and materials
Before starting the installation, make sure you have all the necessary tools and materials on hand:
- Masking slats curtain rod – selected models to suit your interior.
- Mounting glue – Mardom Fix Pro or Mardom Max are recommended , characterized by high bonding strength.
- Hand saw or mitre saw – for precise cutting of slats.
- Bevel box – makes it easier to cut at the right angle.
- Level – to check the proper leveling of the slats.
- Pencil and tape measure – for marking cutting and assembly points.
Surface preparation
The surface on which the bezel will be mounted should be dry, clean and stable. It is recommended to wash, vacuum and degrease the installation site. If necessary, it is advisable to level it to ensure perfect adhesion profiles.
Trimming slats
Masking strips should be cut to the appropriate length, taking into account the angles corner elementów of the room. For this purpose, you can use a hand saw in a bevel box or a mitre saw. To achieve a precise cut, it is recommended to use a sharp blade with a large number of teeth and to cut at slow speed. The slats should be cut at an angle of 45 degrees – this will make it easier to join the individual elements.
Glue application
Apply mounting adhesive to the inside of profiles in a wavy motion. This will ensure even distribution and solid adhesion to the surface. When using Mardom Max adhesive, the setting time is about 8 seconds.
Mounting profiles on the wall
Apply the strip to the previously prepared surface, taking care to level it properly. Gently press down so that the glue spreads evenly and provides a permanent fix. For longer lengths, use a level to make sure profile is installed evenly.
Connecting more elements
When installing successive sections of slats, lubricate the joints with glue to ensure a permanent connection. Remove excess glue with a damp cloth before it dries. For larger cavities or irregularities, use a putty compound, which you can gently sand with fine sandpaper after it dries.
Painting profiles
After the installation is complete and the glue has dried, profiles can be painted in any color to match the interior design. By using a special primer, Mardom Decor stucco is properly protected and smoothed. This increases the adhesion of pigment to the surface and allows perfect coverage profiles with the chosen paint. For this purpose, it is recommended to use paints that do not contain solvents.
What to keep in mind when installing a grille?
Proper installation of the curtain rod grille affects not only the aesthetics of the interior, but also the functionality of curtains and drapes. Key aspects are the proper distance from the ceiling rail, precise gluing and proper surface preparation.
Distance from ceiling rail
In order for curtains and drapes to move freely, it is necessary to maintain an appropriate distance between the ceiling rail and the bezel. The standard distance is 8-12 cm. The choice depends on the type of fabric and the number of tracks in the rail:
- For a single rail (such as for curtains), a gap of 8 cm is sufficient.
- For a double rail (such as curtains + curtains), 10-12 cm is recommended.
- In the case of a three-track rail (such as additional blackouts), it is best to use a bezel 12-15 cm away.
Precision bonding
For the installation of Mardom Decor masking strips, it is recommended to use mounting adhesives, for example, Mardom Fix Pro. The glue should be applied evenly, in a wavy motion, to the entire inner surface of profiles.
After applying the glue, the bezel should be pressed against the ceiling or wall and held for a few seconds to allow the glue to set initially. Its excess can be removed with a damp cloth before it dries.
How to avoid LED light shining through?
If the grille is to be equipped with LED lighting, choose models with LightGuard technology, such as QL035. Standard profiles can let spot light through, and this will cause an unsightly clearance effect.
How to cut the bezel to get perfect joints?
Precise cutting of the slats is extremely important for the aesthetics of the installation. For trimming, it is best to use a mitre saw with fine serrations or a hand saw in a bevel box.
- Straight cuts are used at the ends of the slats against the walls.
- Cuts at a 45-degree angle are required at interior and exterior corners.
- For longer sections that need to be joined along their length, use angled joining.
Summary
It would be difficult to achieve a cohesive space that is refined in every detail, when a grille is not used. It is what keeps the living room or bedroom from being intimidated by large, often unattractive ceiling rails.
In the offer of Mardom Decor you will find grilles made of PolyForce – a material resistant to moisture, UV radiation and mechanical damage. Thanks to this, our profiles not only look beautiful, but also remain durable for years. Choose easy to install grilles from Mardom Decor and enjoy a harmonious interior!
Read also
